נחל שניר 8, יבנה

Nano series

Nano series

Application

Using the TCP / IP protocol, the module has the ability to send information about the input status to another module or to the server. Thanks to this, another device can react, for example, by activating a relay.

Moreover, if the MQTT Inveo service has been activated, the module sends to the mqtt.inveo.com.pl server the input status every 1 minute and every time it is changed. Data downloaded from the server can be used in client own application.

Technical data

Supported protocols:

  • HTTP (GET)
  • SNMP (Trap)
  • Modbus TCP
  • TCP (shared protocol)
  • MQTT Inveo

Power supply:

  • 10-24VDC or PoE IEEE 802.3af
  • Power consumption: max 1,5W

Connectors:

  • LAN – LAN connection and PoE IEEE 802.3af power supply
  • RESET – a button designed to enable DHCP, check the current IP address and restore factory settings
  • INPUT – NO input
  • POWER – an additional power connector used in the event of a PoE power failure. Supply voltage 12-24VD

 

חברה לשיווק באינטרנט חברה לשיווק באינטרנט
Page Reader Press Enter to Read Page Content Out Loud Press Enter to Pause or Restart Reading Page Content Out Loud Press Enter to Stop Reading Page Content Out Loud Screen Reader Support